HG3 Cleanroom Gloves

The right cleanroom glove for every critical process

In a controlled environment, the glove protects the operator, keeps particles and extractables off the product, and holds its barrier against the chemicals in the room. The HALYARD* PUREZERO* HG3 range covers that work in nitrile and cream latex on one validated platform, so you can match the variant to your process with confidence.

Compare the variants
  • 6 variants
  • Nitrile and cream latex
  • ISO Class 3 or higher
  • Category III PPE
Cleanroom technician in coveralls and PUREZERO gloves handling a wafer carrier

Common to every variant

What every HG3 glove has in common

Choose your variant by material, sterility and grip. These four properties stay the same across the range.

See all six variants
  1. 01

    Clean processing

    Washed repeatedly in deionised water to hold particles, extractables, and endotoxins low.

  2. 02

    Low residual sensitisers

    Formulated to minimise residual accelerators and contact sensitisers linked to type IV allergy.

  3. 03

    Static dissipative

    Dissipates static in use, tested to ANSI/ESD STM 15.1, for electronics and sensitive assembly.

  4. 04

    Powder-free

    Supplied powder-free across the range to reduce particulate and protein transfer.

Choose your material

Nitrile or cream latex, one HG3 platform

The range comes in two barrier materials on the shared HG3 platform. The difference is the material and the fit and feel that follow from it. Pick the branch that suits your process, then open its product page for full specifications and ordering.

Cleanroom technician in light blue PUREZERO nitrile gloves handling a silicon wafer

HG3 Nitrile

Accelerator-free nitrile in five variants: white and light blue, a smooth-finish white SGX, and sterile white and light blue. Available non-sterile ambidextrous or sterile hand-specific, with tacky or smooth grip. Tested against 29 chemicals, 14 chemotherapy drugs, and fentanyl.

  • AQL 0.65
  • 0.10 to 0.16 mm fingertip
  • ISO 3+ / Grade A-D
Explore the HG3 Nitrile range
Cleanroom technician in cream latex PUREZERO gloves inspecting a sample vial

HG3 Cream Sterile Latex

A sterile, hand-specific cream latex glove for teams whose process favours the fit and tactile feedback of natural rubber latex. Smooth finish with a beaded cuff, textured fingertips and palms, and processing with undetectable residual accelerator. Tested against 35 chemicals, 14 chemotherapy drugs, and fentanyl.

  • AQL 1.0
  • 0.20 mm fingertip
  • ISO 3+ / Grade A/B
See the HG3 Cream Sterile Latex glove

Selection tool

Find the right HG3 variant

Filter the range by the three choices that separate the variants: whether your process needs sterile gloves, which material suits it, and the grip finish you prefer. The table shows every HG3 variant and the specifications that drive the decision.

Sterility
Material
Grip

Showing all 6 variants.

HG3 variants and key specifications
VariantGripFingertipParticles/cm² (>0.5 micron)ISO / GradeAQLProduct page
White NitrileNon-sterileNitrile, ambidextrous Tacky0.16 mm<950ISO 3+ / B, C, D0.65
Light Blue NitrileNon-sterileNitrile, ambidextrous Tacky0.10 mm<1200ISO 3+ / B, C, D0.65
White SGX NitrileNon-sterileNitrile, ambidextrous Smooth (SGX)0.16 mm<950ISO 3+ / B, C, D0.65
Sterile White NitrileSterileNitrile, hand-specific Smooth0.16 mm<950ISO 3+ / A, B0.65
Sterile Light Blue NitrileSterileNitrile, hand-specific Smooth0.10 mm<1200ISO 3+ / A, B0.65
Cream Sterile LatexSterileLatex, hand-specific Smooth0.20 mm<1200ISO 3+ / A, B1.0

Order codes and full size ranges are listed on each product page. Figures are drawn from the product validation guides and technical data sheets.

Standards

Validation and compliance

The HG3 range is certified as Category III personal protective equipment under Regulation (EU) 2016/425 and tested to the European standards that matter for cleanroom glove selection.

Dexterity and physical integrity

  • EN ISO 21420:2020Dexterity, classified at Level 5.
  • EN 455-1 / 455-2Freedom from holes and physical properties for single-use medical gloves.

Chemical and microbial protection

  • EN ISO 374-1 Type BWith 374-2, 374-4, and 374-5: protection against dangerous chemicals and micro-organisms, including viruses.
  • EN 16523-1:2015+A1:2018Determination of resistance to permeation.

Biocompatibility and regulatory

  • ISO 10993-10 / -11Biological evaluation for irritation, skin sensitisation, and systemic toxicity.
  • EU GMP Annex 1Sterile HG3 gloves support aseptic processing at Parts 7.13 and 7.16.

Cleanliness is tested to IEST-RP-CC005 and static dissipation to ANSI/ESD STM 15.1. The range conforms to the EU REACH Regulation, and the nitrile variants to RoHS Directive 2011/65/EU. Full specifications for every variant are set out in the HG3 range brochure and each product validation guide.

Reliable supply

A supply chain you can plan around

The entire PUREZERO range is made at our own facility in Thailand, under one vertically integrated operation. Controlling materials, design and production in one place keeps quality and sterility assurance consistent, and means there is one site to audit and rely on.

Secure supply

We control manufacturing at our own site in Thailand, which gives you a strong supply guarantee.

Early notice of change

Any necessary change is communicated early, so you have time to manage validations without sudden disruption.

Stock held in Antwerp

We actively build inventory in our Antwerp warehouse to secure product availability across EMEA.

Open to audit

Because we own the site, you can request an in-person audit at our facility in Thailand.

Traceable and documented

Raw materials are traceable to their original supplier. A Certificate of Analysis and a Certificate of Conformity are available for every production lot, and the site is certified to ISO 9001, ISO 13485, and ISO 14001.

Find your HG3 variant

Tell us about your cleanroom and the application, and we will point you to the right HG3 variant and arrange samples or documentation.